블로그로 돌아가기
사용 방법 가이드 2026-11-21 Specialized Retail AU 3 조회수

Install and Use Flash Headlight/Taillight Combo

Install and Use Flash Headlight/Taillight Combo

Learn how to mount and operate the Flash Headlight/Taillight Combo for better visibility on every ride. Covers fit, modes, and charging.

What You Get with the Flash Combo

The Flash Headlight/Taillight Combo includes a front light (up to 70 lumens) and a rear light (up to 20 lumens), each with four modes. Both lights recharge via micro USB and are rated IPX7 waterproof, so they keep working in heavy rain.

This guide covers mounting, choosing modes, and charging so you can get the most out of your set.

Mounting the Lights

  1. Front Light on Handlebars: Use the included O-ring mount (an extra O-ring is included). It fits handlebars from 22.2 mm to 35 mm in diameter. Wrap the O-ring around the bar, thread the light onto it, and tighten until secure.
  2. Rear Light on Seatpost or Elsewhere: The rear light uses the same O-ring mount and fits seatposts 22.2–35 mm. You can also attach it to seatstays, a helmet, or a saddle bag using the built-in fabric belt clip.
  3. Helmet Mounting (Tested Models): The light is tested and approved for Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, and Echelon II. Use the belt clip to fasten it to the helmet strap or vent.

Choosing a Light Mode

Each light has four modes. For the front light, select steady for constant illumination or a flash mode to catch drivers' attention. The rear light offers:

Red Steady (10 lumens) – best for low-light group rides.

Red Power Flash (20 lumens) – brightest flash for high-traffic areas.

Red Disco Flash (14 lumens) – alternating flash pattern for extra visibility.

Red Eco Flash (5 lumens) – longest runtime for all-night rides.

Press the mode button on each light to cycle through modes. Hold the button to turn off.

Flash Combo at a Glance

  • Flash Headlight/Taillight Combo: Front light: up to 70 lumens. Rear light: up to 20 lumens. Enough output to be seen in urban and suburban conditions without blinding other road users.
    Flash Headlight/Taillight Combo
    Flash Headlight/Taillight Combo
  • Flash Headlight/Taillight Combo: Two 200 mAh batteries recharge via micro USB. Follow the supplied product instructions for charging time. Quick recharge means you can top up between rides. No need to buy spare batteries.
  • Flash Headlight/Taillight Combo: IPX7 waterproof rating. Ride confidently in rain without worrying about light failure.

Charging and Battery Tips

Both lights have built-in 200 mAh batteries. Use the included micro USB cable to charge each light. Follow the supplied product instructions for charging time. The lights do not have a battery indicator, so plug them in after every few rides to stay ready.

When not in use for weeks, store the lights in a dry place at room temperature. Partial discharge is fine for the battery type, but avoid letting them sit completely dead for months.

관련 게시글

Customer Service
홈
상품
장바구니
내 정보