Torna al blog
Guide pratiche 2026-11-22 Specialized Retail AU 0 visualizzazioni

How to Install a Standard Presta Valve TPU Tube

How to Install a Standard Presta Valve TPU Tube

Learn how to install a lightweight TPU inner tube with a Presta valve. Step-by-step guide for road and mountain bikes, including size selection and valve core tips.

What You Need to Know Before Installing a TPU Tube

A Standard Presta Valve TPU Tube is a lightweight upgrade for road and mountain bike wheels. Made from thermoplastic polyurethane, these tubes are 60% lighter than standard butyl tubes and offer 70% more thorn resistance. They work with both rim and disc brakes and are suitable for on-road and off-road riding. Before you start, choose the correct size for your tire: the tube is available in 700x25-35c, 700x35-50c, and 27.5/29"x2.0-2.6" sizes, each with different valve lengths (50mm, 65mm, or 80mm).

Step-by-Step Installation

Installing a TPU tube is similar to a standard tube, but the material is more delicate. Handle it gently to avoid pinching.

  1. 1. Remove the wheel and tire: Take the wheel off your bike. Deflate the old tube completely, then use tire levers to remove one side of the tire bead from the rim. Remove the old tube.
  2. 2. Prepare the new TPU tube: Unscrew the Presta valve cap and loosen the small brass nut at the top of the valve stem. Press the valve briefly to let a little air out—this makes the tube easier to insert. The removable valve core (a feature of this tube) allows you to add sealant later if needed, but for installation, leave it in place.
  3. 3. Insert the tube into the tire: Place the tube inside the tire casing, starting with the valve stem through the rim hole. Ensure the valve sits straight. Work the tube evenly around the tire, avoiding twists or folds. Do not stretch the tube—TPU is less elastic than butyl.
  4. 4. Seat the tire bead: Starting opposite the valve, push the tire bead back onto the rim. Use your hands; avoid tire levers to prevent pinching the tube. Work toward the valve from both sides. Before fully seating the last section, check that the tube is not trapped under the bead.
  5. 5. Inflate and check: Tighten the valve nut, then inflate the tube to your usual riding pressure. Listen for air leaks and spin the wheel to check for bulges. If the tire bead is not evenly seated, deflate, reposition, and reinflate.

Standard Presta Valve TPU Tube at a Glance

  • Standard Presta Valve TPU Tube: Thermoplastic polyurethane tubes are 60% lighter, with 5% lower rolling resistance and 70% more thorn resistance than Turbo Tubes. This tube saves significant rotational weight, improving acceleration and climbing, while the thorn resistance reduces flats on rough terrain.
    Standard Presta Valve TPU Tube
    Standard Presta Valve TPU Tube
  • Standard Presta Valve TPU Tube: Available in sizes: 700x25-35c (50mm, 65mm, 80mm valve), 700x35-50c (50mm, 65mm), and 27.5/29"x2.0-2.6" (50mm). Choosing the right size ensures proper fit and performance. Measure your tire sidewall and rim depth to match.
  • Standard Presta Valve TPU Tube: Durable alloy valve with removable valve core for trouble-free inflating. The removable core allows you to add tire sealant or replace the core without replacing the whole tube.

Tips for a Smooth Installation

Because TPU is thinner and more flexible than butyl, it is easier to pinch during installation. Inflate the tube slightly (just enough to give it shape) before inserting to reduce the risk. If you are using the tube with a deep-section rim, choose the 65mm or 80mm valve length so the pump can reach. The alloy valve stem is durable and works with standard Presta pump heads. After installation, check the valve core tightness—sometimes it loosens during inflation. A snug turn with a small wrench or pliers will prevent air loss.

Articoli correlati

Customer Service
Home
Prodotti
Carrello
Profilo