Retour au blog
Guides pratiques 2026-11-20 Specialized Retail AU 0 vues

Install Turbo Connect Display MTB Mount

Install Turbo Connect Display MTB Mount

A step-by-step guide to mounting the Turbo Connect Display MTB Mount on 35mm handlebars, with fit and compatibility checks for your mountain bike.

What This Mount Does

The Turbo Connect Display MTB Mount is designed to securely hold your Turbo Connect Display or Speedzone 2 computer on a mountain bike. It positions the display above the stem, keeping it visible and protected during off-road rides. The mount fits 35mm handlebars and works on both the left and right sides, giving you flexibility in placement.

Installation Steps

Before you start, confirm your handlebar diameter is 35mm. The mount is not compatible with other sizes. You will need a compatible display unit (Turbo Connect Display or Speedzone 2) and basic hand tools.

  1. Choose your side: Decide whether to mount the display on the left or right side of the handlebar. The mount supports both orientations, so pick the side that offers the best visibility and reach for your riding style.
  2. Position the mount on the handlebar: Place the mount on the 35mm section of your handlebar, above the stem. Slide it into position so the display will sit centered and within easy view. Do not tighten yet.
  3. Attach the display unit: Secure your Turbo Connect Display or Speedzone 2 computer onto the mount. Ensure it clicks or locks into place. The mount is purpose-built for these display models.
  4. Tighten the mount securely: Using the appropriate tool, tighten the mount's clamp to the handlebar. Apply even pressure to avoid slipping. Check that the display does not move when pushed.
  5. Verify alignment and clearance: Rotate the handlebar through its full range of motion. Confirm the display does not interfere with brake levers, shifters, or any cables. Adjust the mount position if needed.

Product Details at a Glance

  • Turbo Connect Display – MTB Mount 35mm: Fits 35mm handlebars. Left- and right-side compatible. Securely holds Turbo Connect Display or Speedzone 2 computer. These specifications confirm the mount is purpose-built for mountain bike handlebars and the displays you likely already own.
    Turbo Connect Display – MTB Mount 35mm
    Turbo Connect Display – MTB Mount 35mm

What the Supplied Information Does Not Cover

The supplied product record does not include a torque specification, tightening sequence, or recommended tool type. Use standard bike assembly practices – tighten firmly but avoid over-torquing that could damage the handlebar or mount. If your display does not fit or the mount feels loose, double-check that your handlebar diameter is exactly 35mm and that you are using a compatible display model.

Articles connexes

Customer Service
Accueil
Produits
Panier
Profil