Volver al blog
Guías prácticas 2026-11-20 Specialized Retail AU 0 vistas

How to Install and Use the Command Post SRL

How to Install and Use the Command Post SRL

Learn how to install and set up the Command Post SRL lever on your 1x MTB for a clean, integrated cockpit. Includes compatibility and adjustment tips.

What the Command Post SRL Lever Does

If you run a one-by (1x) drivetrain, the Command Post SRL lever fills the spot where your front shifter would normally sit. This gives you a clean, integrated cockpit with your dropper post control right under your thumb. The lever is designed for smooth, easy activation thanks to an ideal pull ratio and a sealed cartridge bearing pivot.

Installation Steps

  1. Check your mounting hardware: The Command Post SRL lever requires additional mounting hardware. You will need either a Command Post SRL clamp or a SRAM Matchmaker adapter (or equivalent). Confirm which option fits your handlebar setup before starting.
  2. Mount the lever on the bar: Position the lever on the handlebar where the front shifter would normally go. If using a Matchmaker adapter, attach the lever to the adapter first, then mount the adapter to the bar. Tighten to the manufacturer's recommended torque.
  3. Adjust the lever position: The lever position is adjustable, so you can rotate it to sit exactly where your thumb can reach it without stretching. Loosen the adjustment screw slightly, pivot the lever to your preferred angle, then retighten.
  4. Connect to your Command Post: Attach the cable or hose from your dropper post to the SRL lever following the standard routing for your post model. The lever's pull ratio is designed for easy activation, so you should feel a light, consistent pull.

Command Post SRL at a Glance

  • Command Post SRL: Command Post lever for the modern 1x drivetrain systems. This lever is purpose-built for bikes without a front shifter, letting you keep both controls on the left side of the bar.
    Command Post SRL
    Command Post SRL
  • Command Post SRL: Adjustable lever position allows for the perfect set up. You can fine-tune the reach and angle to match your hand size and riding style, reducing fatigue on long descents.
  • Command Post SRL: Sealed cartridge bearing pivot for smooth action. The sealed bearing keeps dirt and moisture out, maintaining a consistent feel ride after ride.

Tips for Daily Use

After installation, test the lever action while stationary. The lever should move freely and return to its resting position without sticking. If the pull feels heavy, check the cable routing for sharp bends or kinks. The sealed cartridge bearing pivot requires no routine lubrication, but keep the lever area clean to prevent grit from building up around the pivot point.

The supplied information does not include specific torque values or cable routing diagrams, so refer to your dropper post's manual for those details.

Artículos relacionados

Customer Service
Inicio
Productos
Carrito
Perfil