What this jacket is built to do
The Women's Trail SWAT Jacket is a light shell for days when the forecast and the weather disagree. Its breathable, wind-resistant fabric carries a DWR water-repellent coating, so it is designed to take the edge off wind and light moisture rather than act as a full storm layer.
The other thing to know before you plan around it: this is a deliberately pared-back SWAT design. Instead of a spread of pockets, it has one, and that single pocket is the key to how you pack and store it.
The details that shape how you use it
- Women's Trail SWAT™ Jacket: Breathable, wind-resistant fabric with a DWR water-repellent coating. This tells you what layer to treat it as: a wind-and-light-moisture shell, not an insulated or fully waterproof jacket.

Women's Trail SWAT™ Jacket - Women's Trail SWAT™ Jacket: One pocket, with minimal bulk, designed to fit into any pocket, pack, or bike equipped with SWAT. Packing decisions should assume a single small pocket rather than multiple stash points.
- Women's Trail SWAT™ Jacket: Abrasion panels are designed to protect the jacket through the toughest trail conditions. The jacket is intended to cope with contact from trail riding, so you do not need to baby it on the bike.
- Women's Trail SWAT™ Jacket: Integrated scuba hood with fixed elastic binding creates the perfect fit. The hood is fixed rather than adjustable, which affects how you layer around the neck.
Layering under a wind shell
Because the jacket is wind-resistant and breathable but not described as insulated, treat it as the outer layer over a base and, if you need warmth, a mid layer. The fabric content gives you a useful clue about stretch and feel.
- Main fabric: 91% nylon, 9% spandex: The high nylon share suits a light, wind-resistant shell; the spandex content is consistent with a fabric that moves with you on the bike.
- Other fabric: 85% nylon, 15% spandex: The second fabric panel has a higher spandex share, which is worth knowing if you are judging how the jacket will feel across different panels.
- Keep the mid layer thin: The jacket is described as minimal bulk, so a bulky mid layer underneath works against the fit the jacket was designed around.
- Plan around the fixed hood: The scuba hood has fixed elastic binding rather than an adjustable system, so check how it sits over your collar or neckwear before you commit to a layering combination.
Packing the jacket into its single pocket
The supplied information describes the jacket as having one pocket and a built-in pocket that helps it fit into any pocket, pack, or SWAT-equipped bike. It does not give a packed size, so use the following as a practical routine rather than a set of manufacturer measurements.
- Empty the pocket first: Start with nothing in the pocket so the jacket can be folded around the pocket rather than around loose items.
- Fold toward the pocket: Fold the jacket in on itself toward the pocket opening, keeping the abrasion panels flat rather than crumpled.
- Turn the pocket inside out over the bundle: Use the pocket as the stuff sack so the packed jacket stays compact and the single pocket does the work it was designed for.
- Choose your carry point: The jacket is described as fitting into any pocket, pack, or bike equipped with SWAT, so decide before the ride whether it lives in your pack or on the bike.
- Check the packed bundle before you ride: Confirm the packed jacket is small enough for the pocket or pack you chose; the supplied information gives no packed dimensions, so test it with your own kit.
Storing it between rides
The same single-pocket design makes storage simple. Keep the jacket loosely folded or packed in its pocket rather than compressed under heavy items, and store it dry. Because the fabric carries a DWR coating, putting it away damp is the habit most likely to work against the finish over time.
If you rotate between a pack and a SWAT-equipped bike, keep the packed jacket in the same place each ride so you are not hunting for it when the weather turns.
Washing a DWR-coated MTB shell: what the supplied information supports
The supplied product record does not include care instructions, so there is no manufacturer washing procedure to quote here. What it does give you is the fabric composition, which is the useful starting point for a conversation with the care label.
- Read the garment care label first: The label on your jacket is the authoritative source for wash temperature, detergent and drying; the supplied record does not state these.
- Treat the DWR coating as the finish to protect: The jacket is described as having a DWR water-repellent coating, so avoid anything you would not use on a coated technical fabric.
- Do not assume a re-proofing routine: The supplied information does not describe how or when to restore the DWR finish, so do not follow a generic re-proofing schedule as if it were a manufacturer instruction.
- Check the jacket after washing: Once washed according to the label, confirm the fabric still beads light moisture as expected before relying on it as your outer layer.
Sizing and colour options
Available variants in the supplied record are Black in XS, S, M and L, plus Tropical Teal in L. If you are between sizes, the fabric composition is the most useful evidence available: both supplied fabrics contain spandex, but the record does not give garment measurements or a fit description, so use the size chart rather than guessing.
- Black: Available in XS, S, M and L.
- Tropical Teal: Available in L in the supplied variant list.
What the supplied information does not cover
The record does not state a waterproof rating, packed dimensions, garment weight, or care instructions. That is not a criticism of the jacket; it simply means those decisions should be made from the garment label and the size chart rather than from assumptions. What the record does support is a clear picture: a light, wind-resistant, DWR-coated shell with one pocket, abrasion panels and a fixed scuba hood, built to be packed small and worn over a thin mid layer.


