Why the SL Range Extender Cable Matters for Your Kenevo SL
The SL Range Extender Cable 285mm MTB is the link between your Specialized SL Range Extender Battery and all Kenevo SL models. Its custom connector with a lock mechanism is designed to keep the connection secure on rough terrain. This guide walks you through routing the cable and setting it up correctly, with checkpoints you can verify along the way.
SL Range Extender Cable 285mm MTB at a glance
- SL Range Extender Cable 285mm MTB: Connects the Specialized SL Range Extender Battery with all Kenevo SL Models. Confirms compatibility with your Kenevo SL and the SL Range Extender Battery.

SL Range Extender Cable 285mm MTB - SL Range Extender Cable 285mm MTB: Custom connector with lock-mechanism ensures a secure connection. The locking connector is key to keeping the cable attached during rides.
- SL Range Extender Cable 285mm MTB: Length: 285mm This length determines how much slack you have for routing; plan your path accordingly.
Routing the cable: a step-by-step approach
- Plan your route: With the 285mm length, choose the most direct path from the range extender battery to the bike's connection point. Avoid sharp bends or areas where the cable could be pinched.
- Check clearance: Ensure the cable does not interfere with moving parts like the suspension or steering. The 285mm length gives limited slack, so verify there is no tension when the handlebars are turned.
- Secure the cable: Use cable ties or frame protection to hold the cable in place. Do not overtighten, as this could damage the cable or frame.
- Connect the battery: Align the custom connector and push until you hear or feel the lock mechanism engage. Tug gently to confirm it is secure.
- Connect to the bike: Plug the other end into the Kenevo SL's charging port or designated connection point, ensuring the connector is fully seated.
Checkpoints after installation
Once the cable is routed and connected, perform these checks to ensure a reliable setup. First, verify the lock mechanism on both connectors is fully engaged. Second, turn the handlebars from lock to lock and check that the cable does not pull taut or rub against the frame. Third, inspect the cable along its length for any kinks or areas where it might be pinched by moving parts. Finally, take a short test ride in a safe area to confirm the connection remains secure over bumps.
What the supplied information does not cover
The supplied product information does not include specific torque values, detailed installation instructions, or maintenance procedures. For those details, consult your Kenevo SL owner's manual or a qualified Specialized dealer. This guide focuses on routing and connection checkpoints based on the available product facts.


