How to Care for Your Deity Black Kat Pedals
By Specialized Retail AU | Published: 2026-10-24
Category: Tips & Care
Keep your Deity Black Kat pedals spinning smoothly with this practical care guide covering cleaning, bearing service, and when to replace.
Quick Answer
Regular cleaning and periodic bearing service keep your Deity Black Kat pedals spinning freely and extend their life. Focus on the sealed bearing system and pedal pins.
Why Maintenance Matters for Your Pedals
The Deity Black Kat pedals feature a double sealed bearing system designed for durability. However, dirt, mud, and water can still work their way past the seals over time, especially if you ride in wet or gritty conditions. Regular care prevents premature wear and keeps the pedal feeling smooth underfoot.
Neglecting pedal maintenance can lead to gritty rotation, loose pins, or bearing failure. A few minutes of care after each ride saves you from costly replacements down the trail.
Diagnosis & Care Steps
- Symptom: Pedal feels gritty or rough when spinning: Likely cause: Dirt or moisture has entered the bearing area. Corrective action: Remove pedals from crank arms, clean the exterior with a mild degreaser and a brush, then dry thoroughly. If still rough, proceed to bearing service. If cleaning doesn't restore smooth rotation, move to the next step.
- Symptom: Loose or wobbly pedal: Likely cause: Axle nut or bearing preload has loosened. Corrective action: Check the axle nut torque (use a pedal wrench or 8 mm hex key). If the pedal still wobbles, the bearings may need replacement. Stop riding if the pedal is loose; continued use can damage the crank arm threads.
- Symptom: Pedal pins are stripped or missing: Likely cause: Over-tightening or trail impact. Corrective action: Replace missing pins with Deity replacement pins. Use a torque wrench (recommended 3-4 Nm) to avoid stripping threads. If threads in the pedal body are damaged, the pedal body may need replacement.
Product Facts
- Deity Black Kat Pedals: Built around a larger double sealed bearing system, our goal with the BLACK KAT was to create a pedal that would not only feel incredible underfoot, but would last the test of time. The double sealed bearings resist contamination better than basic bushings, but they still need periodic cleaning and regreasing to maintain that smooth feel.
Deity Black Kat Pedals
