Cascade Cage II fit and mounting questions
- What bottles does the Cascade Cage II hold?
- The supplied product information says the cage holds short or tall bottles. That covers the two bottle-length cases most riders ask about, but it does not list a diameter range, so check the fit of unusually narrow or wide bottles before relying on it.
- Does the Cascade Cage II fit standard frame bolt spacing?
- The supplied information does not include bolt-hole spacing or a mounting pattern. The cage is listed in one size, Black / One Size, but that does not confirm a spacing measurement. Measure your frame's existing cage mounts and compare before ordering if your frame has unusual spacing.
- Is the Cascade Cage II a side-load cage?
- The supplied information does not describe a side-load design or a left/right entry direction. It describes secure bottle retention with easy in-and-out accessibility, which is consistent with a conventional cage, but the entry direction is not confirmed by the supplied information. If you need a side-load cage for a compact frame, treat this as unconfirmed rather than a side-load option.
- How secure is bottle retention on rough ground?
- The supplied information describes bottle retention and grip as rock solid, with secure retention and easy in-and-out accessibility. That is a retention claim, not a pull-force rating or a test result, so match it to your own riding and check the cage and bolts after the first rough rides.
- What does the Cascade Cage II weigh?
- The supplied specification lists the weight at 50g. That is the only measurement in the selected record, so use it for weight comparisons and do not assume other dimensions from it.
- What is the Cascade Cage II made of?
- The cage uses a composite construction described as lightweight, reliable and well priced. The supplied information does not name the specific composite or list a maximum bottle weight, so avoid treating it as a load-rated or safety-critical component.
Cascade Cage II details that affect the fit decision
- Cascade Cage II: Holds short or tall bottles. This is the clearest bottle-compatibility statement in the supplied record and the first thing to check against the bottles you actually ride with.

Cascade Cage II - Cascade Cage II: Weight: 50g. A concrete figure for riders comparing cage weight, and the only measurement supplied for this product.
- Cascade Cage II: Secure bottle retention with easy in-and-out accessibility. Explains the intended balance between holding a bottle and letting you pull it out while riding.
- Cascade Cage II: Available in Black / One Size. Confirms the colour and size option supplied, while leaving bolt spacing and entry direction for you to verify on your frame.
What to check on your frame before you order
The Cascade Cage II is supplied in one size, so the frame side of the decision matters more than a size chart. Look at the two bolt holes on your frame or fork and note their spacing, then compare that with the cage you plan to replace. The supplied information does not give a bolt spacing figure, so measuring is the honest way to close that gap.
Also check clearance around the cage area. A short bottle may sit lower in the cage than a tall one, and the supplied information does not state a bottle diameter range, so test with the bottles you use most. If your frame has limited space or an awkward angle, confirm the entry direction you need before buying, because a side-load design is not confirmed in the supplied information.
Bottle retention tips that follow from the supplied information
- Match bottle length to the cage: The cage is stated to hold short or tall bottles, so start there rather than assuming one bottle size fits all frames.
- Check the cage and bolts after rough rides: The retention claim is about grip and secure holding; the supplied information does not include a maintenance schedule, so a visual check after bumpy rides is a sensible habit rather than a manufacturer instruction.
- Do not treat the cage as load-rated: No maximum bottle weight or safety-critical rating is supplied, so keep the cage to its stated job of holding a water bottle.


